EX 203C Set Low Speed Micromotor – NSK
Log in to check prices
This complete kit includes low speed handpiece contra angle model, low speed handpiece straight dental air motor.
Kit.
Out of stock
EX 203C SET LOW SPEED MICROMOTOR – NSK
This complete kit includes low speed handpiece contra angle model, low speed handpiece straight dental air motor.
model and low speed External water spray, standard 4 holes backend, forward and reverse operation. This unit does not contain the non-retraction valve. Great entry level.
The EX-203C, EX-6B and NAC-EC are autoclavable. Autoclave sterilization required first time you use and after each patient as noted below.
Autoclaving Procedure :
1) Wipe off dirt with alcohol-soaked cloth.
2) Lubricate.
3) Place into autoclaving pouch and seal it in accordance with instructions on the pouch.
4) Autoclavable up to max. 135°C. Autoclave for 20 min. at 121°C, or 15 min. at 132°C.
5) Keep the handpiece in the autoclave pouch to keep it clean until you use it.
* Sterilization at 121°C for more than 15 minutes is recommended by EN13060 or EN ISO17665-1.
| Weight | 0.7 lbs |
|---|---|
| Dimensions | 1 × 4 × 8 in |
Related products
HANDPIECES
Log in to check prices
HANDPIECES
Log in to check prices
HANDPIECES
Log in to check prices
HANDPIECES
Log in to check prices
HANDPIECES
Log in to check prices
HANDPIECES
Log in to check prices
HANDPIECES
Log in to check prices